Type:Dynamic Speaker
Weight:Approx 9.3 Grams.
Magnet:Material Nd-Fe-B
Impedance:4± 15% Ohm at 1000Hz. 1V
Power Rating:Normal 2.0W Maximum 2.5W
FO:610±20% Hz
S.P.L.:100±3dB/1.0Watt 0.1Meter. Average At1000,1200,1500,2000 Hz.
Distortion:10% Maximum At 1000Hz. 1.0W.
Abnormal Sound Test:Must be Normal Tested by 2.83 Volts. Sine wave for50~5kHz
Polarity:Diaphragm Shall Move Forward When Apply a Positive DC. Red “+” or“ Marked” Terminal
Operating Temperature:-25°C to +65°C
Storage Temperature:-25 °C to +65 °C
Reliable Test
After any following test leave speakers at room temperature for 1 hour, SPL shall not deviate by±3 db from initial value
Load Test:white noise for 96 hours at 2.0 W input power.
High Temperature Test:+65±2 °C 96hours
Low Temperature Test:-25±2 °C 96hours
Humidity Test:+40±2 °C relative humidity 90~95%R.H 96hours
Vibration Test:Frequency 30±15 Hz, Amplitude 1.5 mm for 2 Hours per axis(x. y. z axis)
Drop Test:75 CM free falling on Concrete floor, 10 times.
Temperature Cycle test:25+65°C 5 Cycles Temperature test.
Dimension
Frequency Response Fig
Frequency Range:350~7,500Hz.Average SPL-10dB.
86 13434065620
susan@ruibocn.com
86 769-86572621
