Type:Dynamic Speaker
Weight:Approx 7.0 Grams.
Magnet:Material Nd-Fe-B
Impedance:150 ± 15% Ohm at 1000Hz. 1V
Power Rating:Normal 0.2W Maximum 0.5W
FO:510±20% Hz
S.P.L.:92±3dB/0.2Watt 0.1Meter. Average At1000,1200,1500,2000 Hz.
Frequency Range:300~20,000Hz.Average SPL-10dB.
Distortion:10% Maximum At 1000Hz.0.2W.
Abnormal Sound Test:Must be Normal Tested by 5.48 Volts. Sine wave for50~5kHz
Polarity:Diaphragm Shall Move Forward When Apply a Positive DC. Red “+” or“ Marked” Terminal
Operating Temperature:-25 °C to +65 °C
Storage Temperature:-25 °C to +65 °C
Reliable Test
After any following test leave speakers at room temperature for 1 hour, SPL shall not deviate by * 3 db from initial value
Load Test:white noise for 96 hours at 0.2 W input power.
High Temperature Test:+85±2 °C 96hours
Low Temperature Test:-40±2 °C 96hours
Humidity Test:+40±2 °C relative humidity 90~95%R.H 96hours
Vibration Test:Frequency 30 * 15 Hz, Amplitude 1.5 mm for 2 Hours per axis(x. y. z axis)
Drop Test:75 CM free falling on Concrete floor, 10 times.
Temperature Cycle test: 25 + 65 C 5 Cycles Temperature test.
Dimension
Response Fig